ITP CAMP 2019 Session, June 13 https://itp.nyu.edu/camp2019/session/110 I lead a session called, Make Your Own Controller in Unity [Arduino+Unity], at the ITP CAMP 2019. I made sample scripts in Arduino and Unity through Serial Communications. This example has not used any latency and libraries in Unity. These examples made for …
This is the second blog about how to connect Arduino and Unity with Serial communication. If you want to see how to set up Unity setting for Serial port use in Mac, Please go and check The first blog. Unity version : 2018.3.1f 1 / Mac OS Materials : Arduino, …
I wanted to make a simple example to connect Arduino to Unity. I used serial communication to talk to Unity from Arduino. Unity version : 2018.3.1f1 In the Arduino side, I connected a touch sensor to Digital pin2 and referenced the code from ‘StatechangeDetection.ino’ in Arduino examples. (Only send a …
“what kind of DC adapter can I use to power my Arduino?” “The short answer is: 9 to 12V DC, 250mA or more, 2.1mm plug, centre pin positive. ” “The long answer is that an off-the shelf Arduino adapter:” must be a DC adapter (i.e. it has to put out …
I am thinking to use a Bioelectric Impedance Analysis(BIA) Sensor from a digital skin analyzer to analyze skin humidity and oil conditions. A few weeks ago, I went to ‘The Body Shop’ (A cosmetic brand) to buy a moisturizer. And a staff used the skin analyzer to test my skin …
Lifesaving connectors While I working with circuits and lots of cables, making connectors actually are really good habits and tips for installing and dissembling. Working with a hand on installation with many push buttons at AMNH, I re-thought about connectors and I happened to think about them again. Types …
It will be blogging for learning Machine learning myself. I took a class called Natural of Code from Dan Shiffman and I have started to have interested in Machine Learning. Also, I worked for AMNH for Machine learning table for ‘Our Senses’ exhibition. To be honest, I did not dig …
For the Quick&Dirty show, I made 6 push button prototypes with different tactile feedback. I asked people to imagine and write each character that they guessed. [Main materials] (Start with a top law and clockwise) Two syringes Motorized slide pot Turning magnets Normal arcade button A big button with a haptic motor …
https://www.robotshop.com/en/firgelli-technologies-pq12-actuator-12v-pot.html DataSheet P+ M- M+ P P- potentiometer (P+->5V / P->A0 / P–>GND) M+, M- -> motor pins ~D9 : Enable pin (control speed) D10,11 : motor control pins <Wiring with H-bridge> • Peak power point: 7N @ 12mm/s • Gear ratio: 30:1 • Max speed (no …
I plan to build a dial that is able to control multi-factors such as brightness, colors, and wheel. I came up this idea with an old telephone dial and I wonder how one dial can control multiple tasks. Technically, I was planning to build a programmable tactile dial. So it …